HP ProCurve 5400zl

■ xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■ usb -- Copy data to a USB flash drive.(p. 133)
command-file
■ copy tftp command-file
Copy command script to switch and execute.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy xmodem command-file
Copy command script to switch and execute.
Next Available Options:
■ unix -- Change CR/LF to unix style.(p. 131)
■ pc -- Change CR/LF to PC style.(p. 120)
■ copy usb command-file
Copy command script to switch and execute.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
command-output
■ copy command-output COMMAND-OUTPUT
Specify a CLI command to copy output of.
Next Available Options:
■ tftp -- Copy data to a TFTP server.(p. 124)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■ usb -- Copy data to a USB flash drive.(p. 133)
config
■ copy tftp config CONFIG
Copy data to specied conguration le.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy xmodem config CONFIG
106© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide