HP ProCurve 5400zl

Change CR/LF to unix style.
■ copy running-config xmodem unix
Change CR/LF to unix style.
■ copy startup-config tftp IP-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy startup-config tftp IPV6-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy startup-config xmodem unix
Change CR/LF to unix style.
■ copy event-log tftp IP-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy event-log tftp IPV6-ADDR FILENAME unix
Change CR/LF to unix style.
■ copy event-log xmodem unix
Change CR/LF to unix style.
usb
■ copy usb
Copy data from a USB ash drive.
Next Available Options:
■ startup-config -- Copy data to the switch configuration file.(p. 123)
■ flash -- Copy data to the switch system image file.(p. 116)
■ command-file -- Copy command script to switch and execute.(p. 106)
■ pub-key-file -- Copy the public keys to the switch.(p. 122)
■ autorun-cert-file -- Copy autorun trusted certificate to the switch.(p. 105)
■ autorun-key-file -- Copy autorun key file to the switch.(p. 105)
■ copy command-output COMMAND-OUTPUT usb
Copy data to a USB ash drive.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
■ copy crash-data SLOT-ID-RANGE usb
Copy data to a USB ash drive.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
133© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide