HP ProCurve 5400zl

■ copy config < config1 | config2 | config3 > xmodem pc
Change CR/LF to PC style.
■ copy running-config tftp IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy running-config tftp IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy running-config xmodem pc
Change CR/LF to PC style.
■ copy startup-config tftp IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy startup-config tftp IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy startup-config xmodem pc
Change CR/LF to PC style.
■ copy event-log tftp IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy event-log tftp IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy event-log xmodem pc
Change CR/LF to PC style.
pub-key-file
■ copy tftp pub-key-file
Copy the public keys to the switch.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy usb pub-key-file
Copy the public keys to the switch.
Next Available Option:
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
122© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide