HP ProCurve 5400zl

■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy event-log tftp
Copy data to a TFTP server.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
tftp-ip
■ copy tftp command-file IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp flash IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp pub-key-file IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp startup-config IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp config CONFIG IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp autorun-cert-file IP-ADDR
Specify TFTP server IPv4 address.
126© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide