HP ProCurve 5400zl

tftp-ipv6
■ copy tftp command-file IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp flash IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp pub-key-file IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp startup-config IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp config CONFIG IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp autorun-cert-file IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp autorun-key-file IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy tftp show-tech IPV6-ADDR
129© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide