HP ProCurve 5400zl

■ copy crash-log SLOT-ID-RANGE tftp IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy crash-log mm tftp IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy crash-log tftp IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy flash tftp IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy running-config tftp IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy startup-config tftp IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy event-log tftp IP-ADDR
Specify TFTP server IPv4 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
128© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide