HP ProCurve 5400zl

Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy command-output COMMAND-OUTPUT tftp IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy config < config1 | config2 | config3 > tftp IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy crash-data SLOT-ID-RANGE tftp IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy crash-data mm tftp IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy crash-data tftp IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy crash-log SLOT-ID-RANGE tftp IPV6-ADDR
Specify TFTP server IPv6 address.
Next Available Option:
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ copy crash-log mm tftp IPV6-ADDR
Specify TFTP server IPv6 address.
130© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide