■ copy tftp command-file IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy tftp startup-config IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy tftp startup-config IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy tftp config CONFIG IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy tftp config CONFIG IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy tftp show-tech IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy tftp show-tech IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy xmodem startup-config pc
Change CR/LF to PC style.
■ copy xmodem command-file pc
Change CR/LF to PC style.
■ copy xmodem config CONFIG pc
Change CR/LF to PC style.
■ copy usb command-file FILENAME pc
Change CR/LF to PC style.
■ copy command-output COMMAND-OUTPUT tftp IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy command-output COMMAND-OUTPUT tftp IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy command-output COMMAND-OUTPUT xmodem pc
Change CR/LF to PC style.
■ copy config < config1 | config2 | config3 > tftp IP-ADDR FILENAME pc
Change CR/LF to PC style.
■ copy config < config1 | config2 | config3 > tftp IPV6-ADDR FILENAME pc
Change CR/LF to PC style.
121© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide
To Next Page
Loading...
