HP ProCurve 5400zl

■ usb -- Copy data to a USB flash drive.(p. 133)
tftp
■ copy tftp
Copy data from a TFTP server.
Next Available Options:
■ command-file -- Copy command script to switch and execute.(p. 106)
■ flash -- Copy data to the switch system image file.(p. 116)
■ pub-key-file -- Copy the public keys to the switch.(p. 122)
■ startup-config -- Copy data to the switch configuration file.(p. 123)
■ config -- Copy data to specified configuration file. (ASCII-STR) (p. 106)
■ autorun-cert-file -- Copy autorun trusted certificate to the switch.(p. 105)
■ autorun-key-file -- Copy autorun key file to the switch.(p. 105)
■ show-tech -- Copy custom show-tech script to switch.(p. 123)
■ copy command-output COMMAND-OUTPUT tftp
Copy data to a TFTP server.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy config < config1 | config2 | config3 > tftp
Copy data to a TFTP server.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy crash-data SLOT-ID-RANGE tftp
Copy data to a TFTP server.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy crash-data mm tftp
Copy data to a TFTP server.
Next Available Options:
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ copy crash-data tftp
124© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide