HP ProCurve 5400zl

Next Available Option:
■ append -- Add the key(s) for access.(p. 102)
mm
■ copy crash-data mm
Copy from the management card.
Next Available Options:
■ tftp -- Copy data to a TFTP server.(p. 124)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■ usb -- Copy data to a USB flash drive.(p. 133)
■ copy crash-log mm
Copy from the management card.
Next Available Options:
■ tftp -- Copy data to a TFTP server.(p. 124)
■ xmodem -- Use xmodem on the terminal as the data destination.(p. 135)
■ usb -- Copy data to a USB flash drive.(p. 133)
operator
■ copy tftp pub-key-file IP-ADDR FILENAME operator
Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).
Next Available Option:
■ append -- Add the key(s) for access.(p. 102)
■ copy tftp pub-key-file IPV6-ADDR FILENAME operator
Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).
Next Available Option:
■ append -- Add the key(s) for access.(p. 102)
■ copy tftp autorun-cert-file IP-ADDR FILENAME operator
Replace the key(s) for operator access (default); follow with the 'append' option to
add the key(s).
Next Available Option:
■ append -- Add the key(s) for access.(p. 102)
■ copy tftp autorun-cert-file IPV6-ADDR FILENAME operator
119© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide