HP ProCurve 5400zl

■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 119)
■ append -- Add the key(s) for access. (p. 102)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ append -- Add the key(s) for operator access. (p. 102)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option
to add the key(s). (p. 117)
■ append -- Add the key(s) for access. (p. 102)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 119)
■ append -- Add the key(s) for access. (p. 102)
■ show-tech -- Copy custom show-tech script to switch. (p. 123)
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
■ startup-config -- Copy data to the switch configuration file. (p. 123)
■ tftp-ip -- Specify TFTP server IPv4 address. (IP-ADDR) (p. 126)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
■ tftp-ipv6 -- Specify TFTP server IPv6 address. (IPV6-ADDR) (p. 129)
■ filename -- Specify filename for the TFTP transfer. (ASCII-STR) (p. 109)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
■ copy usb -- Copy data from a USB flash drive. (p. 133)
■ autorun-cert-file -- Copy autorun trusted certificate to the switch. (p. 105)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
■ append -- Add the key(s) for operator access. (p. 102)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to
add the key(s). (p. 117)
■ append -- Add the key(s) for access. (p. 102)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 119)
■ append -- Add the key(s) for access. (p. 102)
■ autorun-key-file -- Copy autorun key file to the switch. (p. 105)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
■ append -- Add the key(s) for operator access. (p. 102)
■ manager -- Replace the key(s) for manager access; follow with the 'append' option to
add the key(s). (p. 117)
■ append -- Add the key(s) for access. (p. 102)
■ operator -- Replace the key(s) for operator access (default); follow with the 'append'
option to add the key(s). (p. 119)
■ append -- Add the key(s) for access. (p. 102)
■ command-file -- Copy command script to switch and execute. (p. 106)
■ filename -- Specify filename for the USB transfer. (ASCII-STR) (p. 109)
■ pc -- Change CR/LF to PC style. (p. 120)
■ unix -- Change CR/LF to unix style. (p. 131)
101© 2009 Hewlett-Packard Development Company, L.P.
copyCommand Line Interface Reference Guide