14. Cable the SID module.
15. Install the fan cage.
16. Do one of the following:
Install the air baffle .
Install the processor mezzanine tray .
17. Install the access panel .
18. Installing the server into the rack .
19. Connect all peripheral cables to the server.
20. Connect each power cord to the power source.
21. Connect each power cord to the server.
22. Power up the server .
23. If removed, install the front bezel .
24. To access the SID, do the following:
a. Press and release the panel (callout 1).
b. After the display fully ejects, rotate the display to view the LEDs (callout 2).
To Next Page
Loading...
