HP ProLiant DL560 Gen11 - Results; Universal media bay option; Installing the universal media bay; Prerequisites

ResultsResults
The installation is complete.
Universal media bay optionUniversal media bay option
The universal media bay is populated in Box 1.
SubtopicsSubtopics
Installing the universal media bayInstalling the universal media bay
Installing the universal media bayInstalling the universal media bay
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
About this taskAbout this task
This server supports the universal media bay with an optical drive bay, two USB 2.0 ports, DisplayPort 1.1a, and 2 SFF stacked drive cage.
ProcedureProcedure
1. Back up all server data on the drive.
2. If installed, remove the front bezel .
3. Power down the server.
4. If installed, open the cable management arm .
5. Remove all power:
a. Disconnect each power cord from the power source.
HPE ProLiant DL560 Gen11 Server User Guide 106