Slot numberSlot number LocationLocation Supported form factorsSupported form factors
1 Primary riser cage
Full-height, ¾-length
Half-height, half-length (low-profile)
2
3
Full-height, half-length
Half-height, half-length (low-profile)
4 Secondary riser cage
Full-height, ¾-length
Half-height, half-length (low-profile)
5
6
Full-height, half-length
Half-height, half-length (low-profile)
The low-profile bracket is required when installing the low-profile expansion card.
HPEHPE Basic Drive LED definitions Basic Drive LED definitions
The HPE Basic drive carrier has the following LEDs:
Amber/blue LED—Managed by the drive backplane in conjunction with the storage controller and is used to indicate drive status.
Green LED—Managed by the drive itself and indicates the drive activity.
SFF SFF basic drive carrierbasic drive carrier
The SFF basic drive carrier supports hot-plug SAS, SATA, and U.3 PCIe4 NVMe drives .
1
1
1
1
1
To Next Page
Loading...
