7. Determine the status of the drive from the drive LED definitions .
8. If removed, install the front bezel .
9. To configure drive arrays, see the relevant storage controller guide .
ResultsResults
The installation is complete.
Rack mounting optionsRack mounting options
Use the quick-deploy, toolless HPE rack rail option to install the server in a standard four-post rack. The rail design supports installation on
rack of different mounting interfaces.
For cable management, the rack rail kit might include one or both of the following options:
Rack rail hoop-and-loop strap
Cable management arm
SubtopicsSubtopics
Rail identification markersRail identification markers
Rack mounting interfacesRack mounting interfaces
Rack rail optionRack rail option
Installing the server into the rackInstalling the server into the rack
Installing the rack rail hook-and-loop strapInstalling the rack rail hook-and-loop strap
Installing the cable management armInstalling the cable management arm
Rail identification markersRail identification markers
The rack rail option support is dependent on these two factors:
To Next Page
Loading...
