HP ProLiant DL560 Gen11 - Install the access panel; Prerequisites; Procedure

3. Install the access panel .
4. Perform the post-installation or maintenance steps required by the procedure that necessitates the removal of the air baffle.
Install the access panelInstall the access panel
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
ProcedureProcedure
1. With the access panel latch open, insert the guide pin on the chassis through the hole on the bottom side of the latch.
2. Close the access panel latch.
The access panel slides to the closed position.
3. Lock the access panel latch.
HPE ProLiant DL560 Gen11 Server User Guide 66