(https://www.hpe.com/support/ilo6https://www.hpe.com/support/ilo6).
iLO license
Customer iLO user name, password, and DNS name
iLO configuration settings
For servers managed by HPE GreenLake for Compute Ops Management , make sure that you have your HPE GreenLake account ID. For
more information, see HPEHPE GreenLake GreenLake for Compute Ops Management Getting Started Guide for Compute Ops Management Getting Started Guide .
Hardware option installation guidelinesHardware option installation guidelines
WARNING:WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to
cool before touching them.
CAUTION:CAUTION:
To avoid data loss, Hewlett Packard Enterprise recommends that you back up all server data before installing or removing
a hardware option, or performing a server maintenance or troubleshooting procedure.
CAUTION:CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any installation, removal, or
replacement procedure. Improper grounding can cause electrostatic discharge.
Install any hardware options before initializing the server.
If multiple options are being installed, read the installation instructions for all the hardware options to identify similar steps and
streamline the installation process.
If the hardware option installation involves internal cabling, review the Cabling guidelines.
Installing the front bezel optionInstalling the front bezel option
ProcedureProcedure
1. Attach the front bezel to the right chassis ear.
2. Press and hold the front bezel release latch.
3. Close the front bezel.
To Next Page
Loading...
