HP ProLiant DL560 Gen11 - 24 SFF drive configuration; E3.S drive configuration

ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 Optical drive (optional)
3 SFF drives
4 iLO service port
5 USB 3.2 Gen 1 port
6 System Insight Display (optional)
7 USB 2.0 ports
8 DisplayPort 1.1a (optional)
9 2 SFF stacked drives (optional)
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
Depending on the type of drive backplane installed , the front-end SFF drive boxes supports SAS, SATA, or U.3 NVMe drives.
The 2 SFF stacked drive cage option supports SAS, SATA, or U.3 NVMe drives.
24 SFF drive configuration24 SFF drive configuration
ItemItem DescriptionDescription
1 Serial number/iLO information pull tab
2 SFF drives
3 iLO service port
4 USB 3.2 Gen 1 ports
5 System Insight Display (optional)
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
Depending on the type of drive backplane installed , the server supports SFF SAS, SATA, or U.3 NVMe drives.
E3.SE3.S drive configuration drive configuration
1
2
3
1
2
3
1
2
1
2
HPE ProLiant DL560 Gen11 Server User Guide 9