The arrow points to the front of the server.
SubtopicsSubtopics
Upgrading from the dual- to quad-processor configurationUpgrading from the dual- to quad-processor configuration
Upgrading from the dual- to quad-processor configurationUpgrading from the dual- to quad-processor configuration
PrerequisitesPrerequisites
Before you perform this procedure, make sure that you have the following items available:
T-30 Torx screwdriver
T-10 Torx screwdriver
Processor option
Standard heatsink option (P48905-B21)
Processor mezzanine tray option (P54803-B21)
About this taskAbout this task
Only the server in the air cooling configuration can be upgraded from the dual- to quad-processor configuration. For the processors that
support the liquid cooling, quad-processor configuration, see the product QuickSpecs on the HPE ProLiant DL560 Gen11 Server website:
https://buy.hpe.com/us/en/p/1014705735https://buy.hpe.com/us/en/p/1014705735
ProcedureProcedure
1. Power down the server.
2. If installed, open the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
To Next Page
Loading...
