Rack mounting interfacesRack mounting interfaces
The rack rails can be installed in a rack that has the following mounting interfaces:
Round-hole Square-hole Threaded round-hole
The illustrations used in this procedure show an icon on the upper right corner of the image. This icon indicates the type of mounting
interface for which the action illustrated in the image is valid.
Rack rail optionRack rail option
This server supports the rack rail option #8.
For more information, see installing the ball-bearing rack rail .
SubtopicsSubtopics
Installing the ball-bearing rack railInstalling the ball-bearing rack rail
Installing the ball-bearing rack railInstalling the ball-bearing rack rail
PrerequisitesPrerequisites
Make sure that the rail option is compatible with the server configuration .
Small slotted screwdriver—This tool is required if you intend to install the server in a threaded round-hole rack.
About this taskAbout this task
To Next Page
Loading...
