4. (Optional) Install the Kensington security lock.
For more information, see the lock documentation.
ResultsResults
The installation is complete.
Drive optionsDrive options
Depending on the drive backplane installed, the server supports the following drive types:
Hot-plug SFF SAS, SATA, and U.3 PCIe4 NVMe drives
Hot-plug E3.S PCIe5 NVMe SSDs
The embedded Intel VROC for HPE Gen11 (Intel VROC) supports software RAID for direct attached SATA and NVMe drives.
To support hardware RAID, install a storage controller option .
SubtopicsSubtopics
Drive installation guidelinesDrive installation guidelines
Installing a SAS, SATA or NVMe driveInstalling a SAS, SATA or NVMe drive
Installing an E3.S driveInstalling an E3.S drive
Drive installation guidelinesDrive installation guidelines
Observe the following general guidelines:
The system automatically sets all drive numbers.
To Next Page
Loading...
