Install the processor mezzanine tray .
21. Install the access panel .
22. Installing the server into the rack .
23. Connect all peripheral cables to the server.
24. Connect each power cord to the power source.
25. Connect each power cord to the server.
26. Power up the server .
27. If removed, install the front bezel .
ResultsResults
The installation is complete.
Memory optionMemory option
The server has either 32 DIMM slots in the dual-processor configuration, or 64 DIMM slots in the quad-processor configuration with the
processor mezzanine board installed. All DIMM slots support HPE DDR5 SmartMemory (RDIMM with ECC, LRDIMM) .
DIMM slots on the system boardDIMM slots on the system board
DIMM slots on the processor mezzanine boardDIMM slots on the processor mezzanine board
To Next Page
Loading...
