Remove cables that are no longer being used. Retaining them inside the server can restrict airflow. If you intend to use the removed
cables later, label and store them for future use.
Cabling diagramsCabling diagrams
Observe the following:
Before cabling components, see the cabling guidelines.
Use the cable part number or search feature to find your diagram.
Component cablingComponent cabling Cable part numberCable part number
Drive box 1 cableDrive box 1 cable —
8 SFF x4 NVMe direct attach cabling for the processors 2 and 4 P55344-001
P55341-001 (For air cooling configuration)
P61769-001 (For liquid cooling configuration)
2 SFF stacked drive: Onboard NVMe cable P55343-001
8 SFF x1 SAS storage controller cable: Type-o controller in Slot 15 P55357-001
8 SFF x2 NVMe drive controller cable: Type-o controller in Slot 15 P48963-001
8 SFF x1 SAS drive controller cable: Type-p controller in the primary
riser
P55362-001
8 SFF x4 NVMe drive controller cable: Type-p controller in the
secondary riser
P55362-001
2 stacked drive controller cable: Type-o controller in Slot 15 P55357-001
2 stacked drive controller cable: Type-p controller in the secondary
riser
P55362-001
Drive box 2 cableDrive box 2 cable —
8 SFF x4 NVMe direct attach cable (for dual-processor, air cooling
configuration only)
P55345-001
8 SFF x4 NVMe direct attach cables for the processors 2 and 4 When box 1 is the universal media bay:
P55347-001
P55346-001 (For air cooling configuration)
P61772-001 (For liquid cooling configuration)
When box 1 is 8 SFF drive cage:
P55348-001
P55342-001 (For air cooling configuration only)
8 E3.S NVMe direct attach cable (for dual-processor, air cooling
configuration only)
P55368-001
12 E3.S NVMe direct attach cables P55371-001
P59130-001 (For air cooling configuration)
P55355-001 (For liquid cooling configuration)
To Next Page
Loading...
