HP StorageWorks 8/20q Reference Guide

102 Fibre Alliance MIB Objects
connUnitLinkIndex (1.3.6.1.3.94.1.12.1.2)
This index is used to create a unique value for each entry in the link table with the same
connUnitLinkUnitId. The value can only be reused if it is not currently in use and is the next
candidate to be used. This value wraps at the highest value represented by the size of INTEGER. The value
is reset to zero (0) when the system is reset, and the first value to be used is 1.
Syntax
INTEGER (1..2147483647)
Access
Read-only
Status
Mandatory
Return value
The table index
connUnitLinkNodeIdX (1.3.6.1.3.94.1.12.1.3)
The node WWN of the unit at one end of the link. If the node WWN is unknown and the node is a
connUnit in the responding agent, then the value of this object must be equal to its connUnitID.
Syntax
OCTET STRING (SIZE(16))
Access
Read-only
Status
Mandatory
Return value
The WWN of the local switch for each entry in the link table. For example: 10 00 00 C0 DD 00 71
C9 00 00 00 00 00 00 00 00.
connUnitLinkPortNumberX (1.3.6.1.3.94.1.12.1.4)
The port number on the unit specified by connUnitLinkNodeIdX if known, otherwise -1. If the value is
non-negative, then it is equal to connUnitPortPhysical-Number.
Syntax
INTEGER
Access
Read-only
Status
Mandatory
Return value
The local port number for each entry in the link table
connUnitLinkPortWwnX (1.3.6.1.3.94.1.12.1.5)
The port WWN of the unit specified by connUnitLinkNodeIdX if known, otherwise 16 octets of binary
0" ::= { connUnitLinkEntry 5 }.
Syntax
connUnitLinkPortWwnX

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English