56 MIB-II Objects
egpOutErrors (1.3.6.1.2.1.8.4)
The number of locally generated EGP messages not sent due to resource limitations within an EGP entity.
Syntax
Counter
Access
Read-only
Status
Mandatory
The EGP Neighbor table
The EGP neighbor table contains information about this entity's EGP neighbors.
e g p N e i g h S t a t e (1. 3. 6 .1. 2.1. 8 . 5 .1.1)
The EGP state of the local system with respect to this entry's EGP neighbor. Each EGP state is represented
by a value that is one greater than the numerical value associated with the state in RFC 904.
Syntax
INTEGER
Access
Read-only
Status
Mandatory
egpNeighAddr (1.3.6.1.2.1.8.5.1.2)
The IP address of this entry's EGP neighbor.
Syntax
IpAddress
Access
Read-only
Status
Mandatory
egpNeighAs (1.3.6.1.2.1.8.5.1.3)
The autonomous system of this EGP peer. Zero (0) is specified if the autonomous system number of the
neighbor is not yet known.
Syntax
INTEGER
Access
Read-only
Status
Mandatory
egpNeighInMsgs (1.3.6.1.2.1.8.5.1.4)
The number of EGP messages received without error from this EGP peer.
To Next Page
Loading...
Need help?
General