HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 113
connUnitPortStatCountTxElements (1.3.6.1.3.94.4.5.1.6)
The number of octets or bytes that have been transmitted by this port, based on one-second periodic
polling of the port. This value is saved and compared with the next polled value to compute net throughput.
For Fibre Channel, ordered sets are not included in the count.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
A hexidecimal value indicating the total number of bytes transmitted by a port.
connUnitPortStatCountRxElements (1.3.6.1.3.94.4.5.1.7)
The number of octets or bytes that have been received by this port, based on one-second periodic polling
of the port. This value is saved and compared with the next polled value to compute net throughput. For
Fibre Channel, ordered sets are not included in the count.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
A hexidecimal value indicating the total number of bytes received by a port.
connUnitPortStatCountBBCreditZero (1.3.6.1.3.94.4.5.1.8)
The count of transitions in/out of BBcredit zero state. The other side is not providing any credit. This is a
Fibre Channel statistic only.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountInputBuffersFull (1.3.6.1.3.94.4.5.1.9)
The count of occurrences when all input buffers of a port were full and outbound buffer-to-buffer credit
transitioned to zero (0). There is no credit to provide to other side. This is a Fibre Channel statistic only.
Syntax
OCTET STRING (SIZE (8))

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English