HP StorageWorks 8/20q - Snmpinbadvalues (1.3.6.1.2.1.11.10); Snmpingenerrs (1.3.6.1.2.1.11.12); Snmpinreadonlys (1.3.6.1.2.1.11.11); Snmpintotalreqvars (1.3.6.1.2.1.11.13)

62 MIB-II Objects
s n m p I n B a d Va l u e s (1. 3 . 6 .1. 2.1.11.10 )
The total number of SNMP PDUs delivered to the SNMP protocol entity and for which the value of the
error-status field is badValue.
Syntax
Counter
Access
Read-only
Status
Mandatory
snmpInReadOnlys (1.3.6.1.2.1.11.11)
The total number valid SNMP PDUs delivered to the SNMP protocol entity and for which the value of the
error-status field is readOnly. It should be noted that it is a protocol error to generate an SNMP PDU that
contains the value readOnly in the error-status field, as such, this object is provided as a means of
detecting incorrect implementations of the SNMP.
Syntax
Counter
Access
Read-only
Status
Mandatory
s n m p I n G e n E r r s (1. 3 . 6 .1. 2.1.11.12 )
The total number of SNMP PDUs delivered to the SNMP protocol entity and for which the value of the
error-status field is genErr.
Syntax
Counter
Access
Read-only
Status
Mandatory
snmpInTotalReqVars (1.3.6.1.2.1.11.13 )
The total number of MIB objects retrieved successfully by the SNMP protocol entity as the result of receiving
valid SNMP GetRequests and GetNexts PDUs.
Syntax
Counter
Access
Read-only
Status
Mandatory
s n m p I nTo t a l S e t Va r s (1. 3 . 6 .1. 2.1.11.14 )
The total number of MIB objects altered successfully by the SNMP protocol entity as the result of receiving
valid SNMP Set-Request PDUs.