HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 69
Status
Mandatory
Return value
A four digit ASCII value (for example, 0400 for MIB revision 4.0)
Connectivity Unit group
The objects described in this section are not in a table format. An example of how to access one of these
objects is:
snmpget localhost public fcmgmt.connSet.uNumber.0.
uNumber (1.3.6.1.3.94.1.1)
The number of connectivity units present on this system (represented by this agent). May be a count of the
boards in a chassis or the number of full boxes in a rack.
Syntax
INTEGER
Access
Read-only
Status
Mandatory
Return value
The number of switches in fabric.
systemURL (1.3.6.1.3.94.1.2)
The top-level URL of the system. If it does not exist, the value is an empty string. The URL format is
implementation dependent and can have embedded keywords that are preceded by a percent sign (for
example, %USER).
Syntax
DisplayString
Access
Read-write
Status
Mandatory
Return value
The switch IP address. For example: http://10.0.0.1. Writes not supported, returns NoSuchName.
statusChangeTime (1.3.6.1.3.94.1.3)
The sysUpTime timestamp at which the last status change occurred for any members of the set, in
centiseconds.
Syntax
TimeTicks
Access
read only
Status
obsolete

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English