116 Fibre Alliance MIB Objects
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountClass1PBSYFrames (1.3.6.1.3.94.4.5.1.17)
The count of times that PBSY was returned to this port because of a Class 1 frame that could not be
delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can
only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountClass1FRJTFrames (1.3.6.1.3.94.4.5.1.18
The count of times that FRJT was returned to this port because of a Class 1 frame that was rejected by the
fabric. This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountClass1PRJTFrames (1.3.6.1.3.94.4.5.1.19)
The count of times that FRJT was returned to this port because of a Class 1 frame that was rejected at the
destination N_Port. This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
To Next Page
Loading...
Need help?
General
