HP StorageWorks 8/20q

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 115
Return value
A hexidecimal number indicating the total number of frame rejects on a port.
connUnitPortStatCountPRJTFrames (1.3.6.1.3.94.4.5.1.13)
The count of times that FRJT was returned to this port because of a frame that was rejected at the
destination N_Port. This is the total for all classes and is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountClass1RxFrames (1.3.6.1.3.94.4.5.1.14)
The count of Class 1 frames received at this port. This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountClass1TxFrames (1.3.6.1.3.94.4.5.1.15)
The count of Class 1 frames transmitted out this port. This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountClass1FBSYFrames (1.3.6.1.3.94.4.5.1.16
The count of times that FBSY was returned to this port because of a Class 1 frame hat could not be
delivered to the other end of the link. This occurs if either the fabric or the destination port is temporarily
busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre
Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))