HP StorageWorks 8/20q Reference Guide

60 MIB-II Objects
as part of the Internet standardization process, the definitions are elevated to accepted status, and a new
object identifier under the transmission group is defined. By convention, the name assigned is:
type OBJECT IDENTIFIER ::= { transmission number }.
Where type is the symbolic value used for the media in the ifType column of the ifTable object, and
number is the actual integer value corresponding to the symbol.
The SNMP group
Implementation of the SNMP group is mandatory for all systems that support an SNMP protocol entity.
Some of the objects defined below are zero-valued in SNMP implementations that are optimized to
support only the functions specific to either a management agent or a management station. In particular, it
should be observed that the objects below refer to an SNMP entity, and there may be several SNMP
entities residing on a managed node.
s n m p I n P k t s (1. 3 . 6 .1. 2.1.11.1)
The total number of messages delivered to the SNMP entity from the transport service.
Syntax
Counter
Access
Read-only
Status
Mandatory
snmpOutPkts (1.3.6.1.2.1.11.2)
The total number of SNMP messages passed from the SNMP protocol entity to the transport service.
Syntax
Counter
Access
Read-only
Status
Mandatory
snmpInBadVersions (1.3.6.1.2.1.11. 3 )
The total number of SNMP messages delivered to the SNMP protocol entity that were for an unsupported
SNMP version.
Syntax
Counter
Access
Read-only
Status
Mandatory
snmpInBadCommunityNames (1.3.6.1.2.1.11.4)
The total number of SNMP messages delivered to the SNMP protocol entity that used an SNMP community
name not known to the entity.
Syntax
Counter

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English