HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 81
connUnitVendorId (1.3.6.1.3.94.1.6.1.31)
The connectivity unit vendor's name
Syntax
DisplayString (SIZE (0..79))
Access
Read-only
Status
Mandatory
Return value
The value is HP
Revision table
The objects described in this section are in a table format indexed by WWN and index. The table of
revisions for hardware and software elements. There are four revision items in each switch. An example of
how to access one of these objects, given a WWN of 100000c0dd0090a7, is:
snmpget localhost public
fcmgmt.connSet.connUnitRevsTable.connUnitRevsEntry.connUnitRevsUni
tId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1.
The number of entries in this table varies depending on which platform is being examined and the number
of blades installed. SNMP first reports the firmware revision and flasher shell version. It then iterates
through each of the installed blades, reporting the PCB revision and ASIC version.
connUnitRevsUnitId (1.3.6.1.3.94.1.7.1.1)
The connUnitId of the connectivity unit that contains this revision table.
Syntax
FcGlobalId
Access
Read-only
Status
Mandatory
Return value
Returns the WWN of the switch followed by 8 bytes of zeros. For example: 10 00 00 C0 DD 00 71
C9 00 00 00 00 00 00 00 00.
connUnitRevsIndex (1.3.6.1.3.94.1.7.1.2)
A unique value among all connUnitRevsEntrys with the same value of connUnitRevsUnitId, in
the range between 1 and connUnitNumRevs[connUnitRevsUnitId].
Syntax
INTEGER (1..2147483647)
Access
Read-only
Status
Mandatory

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English