96 Fibre Alliance MIB Objects
Syntax
INTEGER
Access
Read-only
Status
Mandatory
Return value
The physical port number
connUnitPortStatObject (1.3.6.1.3.94.1.10.1.19)
This contains the Object Identifier (OID) of the first object of the table that contains the statistics for this
particular port. If this has a value of zero (0), then there are no statistics available for this port. The port
type information helps identify the statistics objects that are found in the table.
Syntax
OBJECT IDENTIFIER
Access
Read-only
Status
Deprecated
Return value
The port object ID (1.2.6.1.3.94.4.5.1.1)
connUnitPortProtocolCap (1.3.6.1.3.94.1.10.1.20)
Bit mask that specifies the driver level protocol capability of this port. If this is not applicable, returns all bits
set to zero (0).
The bits have the following definitions:
unknown–0
Loop–1
Fabric–2
SCSI–4
TCP/IP–8
VI–16
FICON–32
Syntax
OCTET STRING (SIZE (2))
Access
Read-only
Status
Mandatory
Return value
Always returns 0x03 (Loop, Fabric)
To Next Page
Loading...
Need help?
General