HP StorageWorks 8/20q - Connunitportsn (1.3.6.1.3.94.1.10.1.12); Connunitportrevision (1.3.6.1.3.94.1.10.1.13); Connunitportvendor (1.3.6.1.3.94.1.10.1.14)

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 93
Syntax
FcAddressId
Access
Read-only
Status
Mandatory
Return value
The address for each port based on domain, area, and AL_PA. For example, port #15 would be equal
to 640F00 (Domain = 0x64, Area = 0x0F, AL_PA = 0x00).
connUnitPortSn (1.3.6.1.3.94.1.10.1.12)
The serial number of the unit. If not applicable, returns an empty string.
Syntax
DisplayString (SIZE(0..79))
Access
Read-only
Status
unsupported
Return value
The media serial number of the Small Form-factor Pluggable (SFP) (or MediaSerialNumber), if
installed.
connUnitPortRevision (1.3.6.1.3.94.1.10.1.13)
The port revision, for example, for a GigaBit Interface Converter (GBIC).
Syntax
DisplayString (SIZE(0..79))
Access
Read-only
Status
unsupported
Return value
The media revision of the SFP (or MediaRevision), if installed.
connUnitPortVendor (1.3.6.1.3.94.1.10.1.14)
The port vendor, for example, for a GBIC.
Syntax
DisplayString (SIZE(0..79))
Access
Read-only
Status
unsupported
Return value
The port vendor as reported by the SFP (if supported).