HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 41
ipRouteAge (1.3.6.1.2.1.4.21.1.10)
The number of seconds since this route was last updated or otherwise determined to be correct. No
semantics of “too old” can be implied except through knowledge of the routing protocol by which the route
was learned.
Syntax
INTEGER
Access
Read-write
Status
Mandatory
Return value
Writes not supported.
ipRouteMask (1.3.6.1.2.1.4.21.1.11)
Indicates the mask to be logical-ANDed with the destination address before being compared to the
value in the ipRouteDest field.
Syntax
IpAddress
Access
Read-write
Status
Mandatory
Return value
Writes not supported.
ipRouteMetric5 (1.3.6.1.2.1.4.21.1.12)
An alternate routing metric for this route. The semantics of this metric are determined by the routing
protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
Syntax
INTEGER
Access
Read-write
Status
Mandatory
Return value
Writes not supported.
ipRouteInfo (1.3.6.1.2.1.4.21.1.13)
A reference to MIB definitions specific to the particular routing protocol that is responsible for this route, as
determined by the value specified in the route's ipRouteProto value. If this information is not present, its
value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier.
Any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
Syntax
OBJECT IDENTIFIER

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English