HP StorageWorks 8/20q

86 Fibre Alliance MIB Objects
Status
Mandatory
Return value
See Table 17 for connUnitSensorMessage return values.
T
connUnitSensorType (1.3.6.1.3.94.1.8.1.7)
The type of component being monitored by this sensor.
Syntax
INTEGER {
unknown(1)
other(2)
battery(3)
fan(4)
power-supply(5)
transmitter(6)
enclosure(7)
board(8)
receiver(9)
}
Access
Read-only
Status
Mandatory
Return value
See Table 18 for connUnitSensorType return values.
T
connUnitSensorCharacteristic (1.3.6.1.3.94.1.8.1.8)
The characteristics being monitored by this sensor
Table 17 ConnUnitSensorMessage values
Sensor Return value
Power Supply Good/Bad/NotInstalled
Fan Good/Bad/NotInstalled
Temperature Status Normal/Warm/Overheating/NotInstalled
Temperature Value Degrees in C
Table 18 ConnUnitSensorType return values
Sensor Return value
Temperature Board(8)
Fan Fan(4)
Power Supply Power Supply(5)
Voltage Board(8)