146 Fabric Element MIB Objects
Status
Current
Return value
Returns the port WWN for each port on switch. For example, the return value for port #2 would be 20
02 00 C0 DD 00 71 C9, and the return value for port #14 would be 20 0E 00 C0 DD 00 71
C9.
fcFxPortFcphVersionHigh (1.3.6.1.2.1.75.1.1.5.1.3)
The highest or most recent version of FC-PH that the FxPort is configured to support.
Syntax
FcphVersion
Access
Read-only
Status
Current
Return value
Always returns 32 (0x20)
fcFxPortFcphVersionLow (1.3.6.1.2.1.75.1.1.5.1.4)
The lowest or earliest version of FC-PH that the FxPort is configured to support.
Syntax
FcphVersion
Access
Read-only
Status
Current
Return value
Always returns 9
fcFxPortBbCredit (1.3.6.1.2.1.75.1.1.5.1.5)
The total number of receive buffers available for holding Class 1 connectrequest, Class 2, or Class3
frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached
NxPort (if applicable) to FxPort.
Syntax
FcBbCredit
Access
Read-only
Status
Current
Return value
The number of receive buffers for each port. The default value is 16, but if extended credits are used,
the modified number of credits is returned.
To Next Page
Loading...
