HP StorageWorks 8/20q - Configuring port threshold alarms

58 MIB-II Objects
Status
Mandatory
e g p N e i g h O u t E r r M s g s (1. 3 . 6 .1. 2.1. 8 . 5 .1. 9 )
The number of EGP-defined error messages sent to this EGP peer.
Syntax
Counter
Access
Read-only
Status
Mandatory
e g p N e i g h S t a t e U p s (1. 3 . 6 .1. 2.1. 8 . 5 .1.10 )
The number of EGP state transitions to the UP state with this EGP peer.
Syntax
Counter
Access
Read-only
Status
Mandatory
egpNeighStateDowns (1.3.6.1.2.1.8.5.1.11)
The number of EGP state transitions from the UP state to any other state with this EGP peer.
Syntax
Counter
Access
Read-only
Status
Mandatory
e g p N e i g h I n t e r v a l H e l l o (1. 3 . 6 .1. 2.1. 8 . 5 .1.12 )
The interval between EGP Hello command retransmissions, in hundredths of a second. This represents the
t1 timer as defined in RFC 904.
Syntax
INTEGER
Access
Read-only
Status
Mandatory
e g p N e i g h I n t e r v a l Po l l (1. 3 . 6 .1. 2.1. 8 . 5 .1.13 )
The interval between EGP poll command retransmissions, in hundredths of a second. This represents the t3
timer as defined in RFC 904.