HP StorageWorks 8/20q - Fcfxportcapcos (1.3.6.1.2.1.75.1.5.1.1.7); Fcfxportcapintermix (1.3.6.1.2.1.75.1.5.1.1.8); Fcfxportcaprxdatafieldsizemax (1.3.6.1.2.1.75.1.5.1.1.5); Fcfxportcaprxdatafieldsizemin (1.3.6.1.2.1.75.1.5.1.1.6)

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 167
Status
Current
Return value
The default is 0 (0x00).
f c F x Po r t C a p R x D a t a Fi e l d S i ze M a x (1. 3. 6 .1. 2.1. 75.1.5.1.1.5 )
The maximum size in bytes of the data field in a frame that the FxPort is capable of receiving from its
attached NxPort.
Syntax
FcRxDataFieldSize
Access
Read-only
Status
Current
Return value
The value is 2112 (0x840)
fcFxPortCapRxDataFieldSizeMin (1.3.6.1.2.1.75.1.5.1.1.6)
The minimum size in bytes of the data field in a frame that the FxPort is capable of receiving from its
attached NxPort.
Syntax
FcRxDataFieldSize
Access
Read-only
Status
Current
Return value
The value is 128 (0x80)
fcFxPortCapCos (1.3.6.1.2.1.75.1.5.1.1.7)
A value indicating the set of classes of service that the FxPort is capable of supporting.
Syntax
FcCosCap
Access
Read-only
Status
Current
Return value
Always returns Class F, 2, 3 (0x0d)
fcFxPortCapIntermix (1.3.6.1.2.1.75.1.5.1.1.8)
A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class
3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1
service.