142 Fabric Element MIB Objects
Configuration group
This group consists of scalar objects and tables. It contains the configuration and service parameters of the
Fabric Element and the FxPort(s). The group represents a set of parameters associated with the Fabric
Element or an FxPort to support its NxPorts. The objects described in this section are not in a table
format. An example of how to access one of these objects is:
snmpget localhost public fcFeFabricName.0.
fcFeFabricName (1.3.6.1.2.1.75.1.1.1)
The Name_Identifier of the fabric to which this Fabric Element belongs.
Syntax
FcNameId
Access
Read-write
Status
Current
Return value
The WWN of the principal switch; for example, 10 00 00 C0 DD 00 71 C2. Writes are not
supported.
fcFeElementName (1.3.6.1.2.1.75.1.1.2)
The Name_Identifier of the Fabric Element.
Syntax
FcNameId
FcCosCap BITS {
classF(0)
class1(1)
class2(2)
class3(3)
class4(4)
class5(5)
class6(6)
}
FcFeModuleCapacity Unsigned32
FcFeFxPortCapacity Unsigned32
FcFeModuleIndex Unsigned32
FcFeFxPortIndex Unsigned32
FcFeNxPortIndex Integer32 (1..126)
FcBbCreditModel INTEGER { regular(1), alternate (2) }
Table 31 FE-MIB textual substitutions
Description Syntax
To Next Page
Loading...
Need help?
General