HP StorageWorks 8/20q Reference Guide

150 Fabric Element MIB Objects
Current
Return value
Unsupported. Always returns error status NoSuchName.
fcFxPortOperMode (1.3.6.1.2.1.75.1.2.1.1.3)
The current operational mode of the FxPort
Syntax
INTEGER { unknown(1), fPort(2), flPort(3) }
Access
Read-only
Status
Current
Return value
See Table 33 for fcFxPortOperMode return values.
fcFxPortAdminMode (1.3.6.1.2.1.75.1.2.1.1.4)
The desired operational mode of the FxPort
Syntax
INTEGER { fPort(2), flPort(3) }
Access
Read-write
Status
Current
Return value
Unsupported. Always returns error status NoSuchName.
FxPort Physical Level table
The objects described in this section are in table format, indexed by switch index and port index. An
example of how to access one of these objects is: snmpget localhost public
fcFxPortPhysAdminStatus.1.1. This table contains one entry for each FxPort in the Fabric
Element, and the physical level status and parameters of the FxPorts.
fcFxPortPhysAdminStatus (1.3.6.1.2.1.75.1.2.2.1.1)
The desired state of the FxPort. A management station may place the FxPort in a desired state by
setting this object accordingly. The testing(3) state indicates that no operational frames can be
passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the
offline(2) state. As the result of either explicit management action or per-configuration information
accessible to the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the
online(1) or testing(3) states, or remains in the offline state.
Syntax
Table 33 Port operational mode return values
Mode Return value
Unknown 1
F_Port 2
FL_Port 3

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English