HP StorageWorks 8/20q Reference Guide

88 Fibre Alliance MIB Objects
Return value
Returns the WWN of the switch followed by 8 bytes of zeros. For example: 10 00 00 C0 DD 00 71
C9 00 00 00 00 00 00 00 00.
connUnitPortIndex (1.3.6.1.3.94.1.10.1.2)
A unique value among all connUnitPortEntrys on this connectivity unit, between 1 and
connUnitNumPort[connUnitPortUnitId].
Syntax
INTEGER (1..2147483647)
Access
Read-only
Status
Mandatory
Return value
The index for each port on the switch = 1–8, 12, 16, 20, 24 (varies depending on number of licensed
ports)
connUnitPortType (1.3.6.1.3.94.1.10.1.3)
The port type
Syntax
INTEGER {
unknown(1)
other(2)
not-present(3)
hub-port(4)
n-port(5)–End port for fabric
nl-port(6)–End port for loop
fl-port(7)–Public loop
f-port(8)––Fabric port
e-port(9)––Fabric expansion port
g-port(10)––Generic fabric port
domain-ctl(11)––Domain controller
hub-controller(12)
scsi(13)––Parallel SCSI port
escon(14)
lan(15)
wan(16)
ac(17)–AC power line
dc(18)–DC power line
ssa(19)–Serial storage architecture
wdm(20)–Optical wave division multiplex
ib 21)–Infiniband
ipstore(22)–IP storage
}
Access
Read-only

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English