HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 111
connUnitZoningAliasMemberID (1.3.6.1.3.94.1.14.1.7)
The ID of the alias member based on connUnitZoningAliasMemberIdType.
Syntax
FcGlobalId
Access
Read-only
Status
Mandatory
Return value
Returns the alias zone member name as 16 8-bit octets. Mapped as follows:
WWN member–WWN (8 bytes) followed by 8 bytes of zeros
FC address–FC address (3 bytes) followed by 13 bytes of zeros
Domain/Port–Domain/Port address (2 bytes) followed by 14 bytes of zeros
Port statistics table
The objects described in this section are in a table format indexed by WWN and index. The index
represents the port number to interrogate. An example of how to access one of these objects, given a
WWN of 100000c0dd0090a7, is:
snmpget localhost public
fcmgmt.statSet.connUnitPortStatTable.connUnitPortStatEntry.connUni
tPortStatUnitId.16.0.0.192.221.0.144.167.0.0.0.0.0.0.0.0.1.
There is only one statistics table for each individual port. For all objects in the statistics table, if the object is
not supported by the connUnit, then the high-order bit is set to 1 and all other bits set to zero (0). The
high-order bit is reserved to indicate whether the object is supported. All objects start at a value of zero
(0) at hardware initialization and continue incrementing until end of 63-bits and then wrap to zero (0).
connUnitPortStatUnitId (1.3.6.1.3.94.4.5.1.1)
A unique value among all entries in this table having the same connUnitPortStatUnitId, between 1
and connUnitNumPort [connUnitPortStatUnitId].
Syntax
FcGlobalId
Access
Read-only
Status
Mandatory
Return value
Returns the WWN of the switch followed by 8 bytes of zeros. For example: 10 00 00 C0 DD 00 71
C9 00 00 00 00 00 00 00 00.
connUnitPortStatIndex (1.3.6.1.3.94.4.5.1.2)
A unique value among all entries in this table, between 0 and
connUnitNum-Port[connUnitPortUnitId].
Syntax
INTEGER (0..2147483647)
Access
Read-only
To Next Page
Loading...
Need help?
General