HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 95
resetConnUnitPortCounters(8)
}
Access
Read-write
Status
Mandatory
Return value
See Table 24 for connUnitPortControl read return values. See Table 25 for
connUnitPortControl write command values.
connUnitPortName (1.3.6.1.3.94.1.10.1.17)
A user-defined name for this port. This means that up to DisplayString characters may be supported. If
less than that number of characters, then the name is truncated in the connUnit.
Syntax
INTEGER
Access
Read-write
Status
Mandatory
Return value
The symbolic port name. All ports return port followed by the port number. For example, port#2
would return Port2 by default.
connUnitPortPhysicalNumber (1.3.6.1.3.94.1.10.1.18)
The internal port number this port is known by. In many implementations, this should be the same as
connUnitPortIndex. Some implementations may have an internal port representation that is not
compatible with the rules for table indexes. In that case, provide the internal representation of this port in
this object. This value may also be used in the connUnitLinkPortNumberX or
connUnitLinkPortNumberY objects of the connUnitLinkTable.
Table 24 connUnitPortControl read return values
Port value Return value
Online online(7)
Offline offline(6)
Diagnostics offline 6)
Other unknown(1)
Table 25 connUnitPortControl write command values
Control value Command sent
Online(7) online
Offline(6) offline
ResetCounters(8) clear counters
Other error returned
To Next Page
Loading...
Need help?
General