HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 123
Status
Mandatory
Return value
The total number of DecodeErrors for a port.
connUnitPortStatCountPrimitiveSequenceProtocolErrors (1.3.6.1.3.94.4.5.1.42)
The count of primitive sequence protocol errors detected at this port. This count is part of the Link Error
Status Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
The total number of PrimSeqErrors for a port.
connUnitPortStatCountLossofSignal (1.3.6.1.3.94.4.5.1.43)
The count of instances of signal loss detected at port. This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountLossofSynchronization (1.3.6.1.3.94.4.5.1.44)
The count of instances of synchronization loss detected at port. This count is part of the Link Error Status
Block (LESB). (FC-PH 29.8). This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
The total number LossOfSyncs detected by this port.
connUnitPortStatCountInvalidOrderedSets (1.3.6.1.3.94.4.5.1.45)
The count of invalid ordered sets received at port. This count is part of the Link Error Status Block (LESB).
(FC-PH 29.8). This is a Fibre Channel-only statistic.

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English