HP StorageWorks 8/20q Reference Guide

156 Fabric Element MIB Objects
Access
Read-write
Status
Current
Return value
Returns alternate(2). Writes not supported.
The Error group
The objects described in this section are in table format, indexed by switch index and port index. An
example of how to access one of these objects is: snmpget localhost public
fcFxPortLinkFailures.1.1. This group consists of tables that contain information about the various
types of errors detected. The management station may use the information in this group to determine the
quality of the link between the FxPort and its attached NxPort.
The FxPort Error table contains counters recording numbers of errors detected since the management agent
re-initialized. The table contains one entry for each FxPort in the Fabric Element. The first six column
objects, after the port index, correspond to the counters in the Link Error Status Block (LESB).
f c F x Po r t L i n k F a i l u re s (1.3. 6 .1. 2.1. 75.1.3.1.1.1)
The number of link failures detected by this FxPort
Syntax
Counter32
Access
Read-only
Status
Current
Return value
The total number of LinkFailures encountered for the port
fcFxPortSyncLosses (1.3.6.1.2.1.75.1.3.1.1.2)
The number of loss-of-synchronizations detected by the FxPort
Syntax
Counter32
Access
Read-only
Status
Current
Return value
The total number of LossOfSyncs encountered for the port
fcFxPortSigLosses (1.3.6.1.2.1.75.1.3.1.1.3)
The number of loss-of-signals detected by the FxPort
Syntax
Counter32
Access
Read-only

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English