HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 145
TimeStamp
Access
Read-only
Status
Current
Return value
Unsupported. Always returns error status NoSuchName.
fcFeModuleFxPortCapacity (1.3.6.1.2.1.75.1.1.4.1.6)
The number of FxPorts that can be contained within the module. Within each module, the ports are
uniquely numbered in the range from 1 to fcFeModuleFx-PortCapacity. However, the numbers are
not required to be contiguous.
Syntax
FcFeFxPortCapacity
Access
Read-only
Status
Current
Return value
The total number of ports the switch can have = 1–8, 12, 16, 20, 24 (varies depending on number of
licensed ports)
fcFeModuleName (1.3.6.1.2.1.75.1.1.4.1.7)
The Name_Identifier of the switch
Syntax
FcNameId
Access
Read-write
Status
Current
Return value
The WWN of the switch; for example, 10 00 00 C0 DD 00 71 C9. Writes are not supported.
FxPort configuration table
The objects described in this section are in table format, indexed by switch index and port index. An
example of how to access one of these objects is: snmpget localhost public
fcFxPortName.1.1. This table contains one entry for each FxPort and configuration parameters of
the ports.
fcFxPortName (1.3.6.1.2.1.75.1.1.5.1.2)
The WWN of this FxPort. Each FxPort has a unique port WWN within the fabric.
Syntax
FcNameId
Access
Read-only

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English