EasyManuals Logo

HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 37
Access
Read-only
Status
Mandatory
The IP Address table
The IP address table contains this entity's IP addressing information.
ipAdEntAddr (1.3.6.1.2.1.4.20.1.1)
The IP address to which this entry's addressing information pertains.
Syntax
IpAddress
Access
Read-only
Status
Mandatory
ipAdEntIfIndex (1.3.6.1.2.1.4.20.1.2)
The index value that uniquely identifies the interface to which this entry is applicable. The interface
identified by a particular value of this index is the same interface as identified by the same value of
ifIndex.
Syntax
INTEGER
Access
Read-only
Status
Mandatory
ipAdEntNetMask (1.3.6.1.2.1.4.20.1.3)
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all
the network bits set to 1 and all the hosts bits set to 0.
Syntax
IpAddress
Access
Read-only
Status
Mandatory
ipAdEntBcastAddr (1.3.6.1.2.1.4.20.1.4)
The value of the least-significant bit in the IP broadcast address used for sending datagrams on the
(logical) interface associated with the IP address of this entry. For example, when the Internet standard
all-ones broadcast address is used, the value is 1. This value applies to both the subnet and network
broadcasts addresses used by the entity on this (logical) interface.

Table of Contents

Other manuals for HP StorageWorks 8/20q

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP StorageWorks 8/20q and is the answer not in the manual?

HP StorageWorks 8/20q Specifications

General IconGeneral
BrandHP
ModelStorageWorks 8/20q
CategorySwitch
LanguageEnglish

Related product manuals