HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 99
Access
Read-only
Status
Mandatory
Return value
The table index
connUnitEventId (1.3.6.1.3.94.1.11.1.3 )
The internal event ID, which is incremented for each event, ranging between 1 and
connUnitMaxEvents. Not used as a table index to simplify the agent implementation. When the ID
value reaches the end of the range specified by connUnitMaxEvents, the ID rolls over to start at 1. This
value is set back to 1 at reset. The relationship of this value to the index is that internal event ID may
represent a smaller number than a 32-bit integer (for example, maximum 100 entries) and would only have
a value range up to connUnitMaxEvents.
Syntax
INTEGER
Access
Read-only
Status
Deprecated
Return value
Unsupported. Always returns error status NoSuchName.
connUnitREventTime (1.3.6.1.3.94.1.11.1. 4 )
The real time when the event occurred. It has the following format.
DDMMYYYY HHMMSS
DD=day number
MM=month number
YYYY=year number
HH=hour number
MM=minute number
SS=seconds number
If not applicable, return either a NULL string or 00000000 000000.
Syntax
DisplayString (SIZE (0..15))
Access
Read-only
Status
Mandatory
Return value
The timestamp of the event
connUnitSEventTime (1.3.6.1.3.94.1.11.1.5)
The sysUpTime timestamp when the event occurred.
Syntax
connUnitSEventTime

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English