HP StorageWorks 8/20q Reference Guide

HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Simple Network Management Protocol Reference Guide 117
connUnitPortStatCountClass2RxFrames (1.3.6.1.3.94.4.5.1.20)
The count of Class 2 frames received at this port. This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
The total number of Class 2 frames received by a port.
connUnitPortStatCountClass2TxFrames (1.3.6.1.3.94.4.5.1.21)
The count of Class 2 frames transmitted out this port. This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
The total number of Class 2 frames transmitted by a port.
connUnitPortStatCountClass2FBSYFrames (1.3.6.1.3.94.4.5.1.22)
The count of times that FBSY was returned to this port because of a Class 2 frame that could not be
delivered to the other end of the link. This occurs if either the fabric or the destination port is temporarily
busy. FBSY can only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre
Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))
Access
Read-only
Status
Mandatory
Return value
Unsupported. Always returns the high-order bit to 1 with all other bits set to zero (0).
connUnitPortStatCountClass2PBSYFrames (1.3.6.1.3.94.4.5.1.23)
The count of times that PBSY was returned to this port because of a Class 2 frame that could not be
delivered to the other end of the link. This occurs if the destination N_Port is temporarily busy. PBSY can
only occur on SOFc1 frames (the frames that establish a connection). This is a Fibre Channel-only statistic.
Syntax
OCTET STRING (SIZE (8))

HP StorageWorks 8/20q Specifications

General

Brand	HP
Model	StorageWorks 8/20q
Category	Switch
Language	English